Instructions for Using the Pot Mould

1. **Disassemble and Clean**: Begin by carefully removing all bolts and disassembling the mould. Ensure that each part is thoroughly cleaned to guarantee a pristine casting surface.

2. **Apply Lubrication**: Coat the middle portion of the mould, including the small triangle on the top, with a thin layer of petroleum jelly. This will facilitate easy release of the casted pot.

3. **Reassemble**: Once lubricated, reassemble all parts of the mould securely, ensuring proper alignment.

4. **Prepare Cement Mix**: Mix your cement and sand in a 50/50 ratio. It's essential not to use excessive water. Aim for a thick consistency akin to cookie dough. Adjust the mixture by adding more sand or cement if it becomes too fluid.

5. **Cast Mixture into Mould**: Pour the prepared cement and sand mixture into the mould, filling it completely.

6. **Remove Air Pockets**: Gently tap the bottom of the mould with your knuckles to dislodge any trapped air bubbles. This step helps ensure uniformity and strength in the finished pot.

7. **Allow Setting Time**: Place the filled mould on a level surface and allow it to set undisturbed for at least 12 hours. This period allows the mixture to solidify and take shape.

8. **Demoulding Process**: Once the pot is completely dry, carefully disassemble the sides of the mould. Allow the pot to set for an additional 12 hours to strengthen.

9. **Release the Pot**: To remove the pot from the mould, use a sharp putty knife to gently loosen the edges where they meet the base. Then, carefully pull the pot free from the mould.

By following these step-by-step instructions meticulously, you'll create beautifully crafted pots with ease and precision.

**Instructions for Using the Pot Mould**

1. **Disassemble and Clean**: Begin by carefully removing all bolts and disassembling the mould. Ensure that each part is thoroughly cleaned to guarantee a pristine casting surface.

2. **Apply Lubrication**: Coat the middle portion of the mould, including the small triangle on the top, with a thin layer of petroleum jelly. This will facilitate easy release of the casted pot.

3. **Reassemble**: Once lubricated, reassemble all parts of the mould securely, ensuring proper alignment.

4. **Prepare Cement Mix**: Mix your cement and sand in a 50/50 ratio. It's essential not to use excessive water. Aim for a thick consistency akin to cookie dough. Adjust the mixture by adding more sand or cement if it becomes too fluid.

5. **Cast Mixture into Mould**: Pour the prepared cement and sand mixture into the mould, filling it completely.

6. **Remove Air Pockets**: Gently tap the bottom of the mould with your knuckles to dislodge any trapped air bubbles. This step helps ensure uniformity and strength in the finished pot.

7. **Allow Setting Time**: Place the filled mould on a level surface and allow it to set undisturbed for at least 12 hours. This period allows the mixture to solidify and take shape.

8. **Demoulding Process**: Once the pot is completely dry, carefully disassemble the sides of the mould. Allow the pot to set for an additional 12 hours to strengthen.

9. **Release the Pot**: To remove the pot from the mould, use a sharp putty knife to gently loosen the edges where they meet the base. Then, carefully pull the pot free from the mould.

By following these step-by-step instructions meticulously, you'll create beautifully crafted pots with ease and precision.